CUTTING UNIT FOR RAIZOR MkII
Art. 433PWRMK2 (angle grinder not included)
- Multi-angle cutting unit to be used in combination with the RAIZOR MkII rail cutter (angle grinder not included).
- It performs cuts at any angles between 90° (straight cut) and 45° (“miter cut”, the actual angle is 47°), therefore including intermediate angles.
- Tilting movement (plunge cut) to adjust the cutting depth and perform openings, squared and rectangular holes, as well cuts in multiple steps.
- In order to obtain accurate cuts, the device is equipped with 4 support wheels all placed on the tile and close to diamond disc. They guarantee maximum stability of the device and minimize any
sort of mechanical stress. Device is provided with additional 4 wheels for sliding onto aluminium bar/rail.
- Compatible with the most popular makes and models of electrical angle grinders.
- Available in version for grinders with M14 metric arbor and version for 5/8”-11 imperial arbour.
- It can be used dry (standard product) or wet (for wet in combination with the additional dust suppression water feed – Art. 433PWW A, use an angle grinder with IP ≥ 54 or cordless device*).
- Equipped with connecting port for dust extractor.
- Turbo diamond disc Ø 125 mm – 5” (art. 179CCT125SP) included.
- Cutting depth (thickness) allowed: 20 mm (0.79”) at 90°, 16 mm (0.63”) at 45° angle.
- It can be used on RAIZOR MkII only (not compatible with art. 433CR R).
*Safety regulations may vary from country to country. Therefore, it is strongly recommended to refer to, and comply with, any regulations in force in the country where the product is used.
![](https://www.raimondispa.com/wp-content/uploads/2024/06/per_mk2_principale_v2_no_dischi.jpg)
Angle grinder and special disc for jolly not included. It includes Ø 125 mm (5″) turbo diamond disc.
![](https://www.raimondispa.com/wp-content/uploads/2024/06/power_raizor_mk2_angolazioni_eng.jpg)
KIT FOR WET CUT AND DUST SUPPRESSION
Art. 433PWW A
- Wet cooling device to be used in combination with POWER RAIZOR MkII, POWER RAIZOR and BC45.
- Blade cooling with water grants:
1) Complete suppression of dust;
2) Better cut finishing;
3) Quicker cut.
- Both adjustments onto tap and onto spraying nozzle allow a perfect cooling with a minimal amount of water.
- To be used only in combination with cordless (battery operated) angle ginders and/or corded models having rating IP 54* or any higher.
- It can be used with any cutting position/angle (45°/90°).
- Carrytank capacity of 8 litres (1,75 gal) with relief valve.
*LSafety Regulations may vary from Country to Country. Therefore, it is strongly recommended to refer & comply to the legislation in force on the Country where the products is being used.
![DSC_4228_RGB_1](https://www.raimondispa.com/wp-content/uploads/2017/10/DSC_4228_RGB_1.jpg)
![DSC_4325_RGB](https://www.raimondispa.com/wp-content/uploads/2017/10/DSC_4325_RGB.jpg)
![](https://www.raimondispa.com/wp-content/uploads/2017/10/DSC_4422_RGB1.jpg)
![](https://www.raimondispa.com/wp-content/uploads/2017/10/DSC_4390_RGB_11.jpg)
DUST CONTAINMENT DEVICE
Art. 433PWZP A
- Dust containment device to be used in combination with POWER RAIZOR MkII and POWER RAIZOR cutting unit.
- Used in combination with a proper aspirator, it allows to radically reduce the amount of dust on the environment while dry cut is performed.
- The device can be used onto POWER RAIZOR MkII and POWER RAIZOR equipped with any kind of angle grinder.
- Adjustable according with slab thickness.
- Can be used for 45° miter cut and 90° straight cut.
![](https://www.raimondispa.com/wp-content/uploads/2017/10/DSC_4267_RGB_11.jpg)
![](https://www.raimondispa.com/wp-content/uploads/2024/06/ll-di-taglio-pwr-mk2_eng.jpg)